□

Save $50 on orders of $450 or more -- CODE: 50OFF450

Menu
0

Save $50 on orders of $450 or more -- CODE: 50OFF450

0

Your Cart is Empty

    Previous | Next
    Home / S3 / MK7 BICOOLER PIPING UPGRADE
    MK7 BICOOLER PIPING UPGRADE
    MK7 BICOOLER PIPING UPGRADE
    MK7 BICOOLER PIPING UPGRADE
    MK7 BICOOLER PIPING UPGRADE
    MK7 BICOOLER PIPING UPGRADE

    MK7HU

    MK7 BICOOLER PIPING UPGRADE

    $247.00
    3 reviews
    • 30 Day Money-Back Guarantee | IN STOCK


    HIGHLIGHTS

    • INCREASED COOLING
    • IMPROVED IAT's

    PROFILE

    The ARM MK7 Bi-Cooler Piping Upgrade allows you to run the ARM MK7 FMIC with the OEM intercooler, or any upgraded OEM location intercooler that fits the OEM charge piping. The ARM MK7 Bi-Cooler Upgrade is the ultimate solution to boost the performance of your MK7's charge-air cooling system.  The ARM MK7 Bi-Cooler Upgrade features a unique dual-cooling setup that significantly improves the heat dissipation of your Gen 3 EA888, allowing for lower IAT's, higher power output and increased cooling efficiency.

    ARM MK7 Bicooler Upgrade

    Made from 6-Layer Steel Wire Reinforced Silicone, the ARM MK7 Bi-Cooler Piping Upgrade can handle over 50psi, and anything you can throw at it.  To secure the boost, the ARM Bi-Cooler Kit uses constant-tension T-Bolt clamps to prevent any loosening over time. 

    MK7 Bicooler Upgrade
    The ARM MK7 Bi-Cooler Piping Upgrade maintains a consistent 2.5" diameter throughout the entire system to maximize volume while maintaining charge-air velocity.  In testing we found the ARM Bi-Cooler Setup to be incredibly effective, pairing the ARM MK7 FMIC with just the OEM intercooler we were able to see IAT's around only 13 degrees above ambient. 


     MK7 Bicooler Upgrade
      

    IN THE BOX

    • ARM MK7 Bi-Cooler Piping - Driver Side
    • ARM MK7 Bi-Cooler Piping - Passenger Side
    • ARM T-Bolt Clamps


    FITMENT GUIDE

    The ARM MK7 Bi-Cooler Piping Upgrade is designed to work specifically with the ARM MK7 FMIC.  Therefore the ARM MK7 FMIC is a requirement for fitting the ARM MK7 Bi-Cooler Upgrade successfully.

    Make Model Submodel Engine
    Audi 8V S3 Quattro 2.0T
    Audi A3 8V FWD 1.8T
    Audi A3 8V FWD 2.0T
    Audi A3 8V Quattro 2.0T
    Volkswagen Alltrack All 1.8T Gen3
    Volkswagen Golf VII GTI 1.8T Gen3
    Volkswagen Golf VII Hatchback 1.8T Gen3
    Volkswagen Golf VII Sportwagen 1.8T Gen3
    Volkswagen Jetta VII GLI Sedan 2.0L Gen3
    Volkswagen Golf VII GTI 2.0T Gen3
    Volkswagen Golf VII Hatchback 2.0T Gen3
    Volkswagen Golf VII Facelift FWD 1.8T Gen3
    Volkswagen Golf VII Facelift FWD 2.0T Gen3
    Volkswagen Golf VII R 4Motion 2.0T Gen3
    Volkswagen Golf VII R GTI 2.0T Gen3
    Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3
    Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3
    Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3

    Customer Reviews
    5.0 Based on 3 Reviews
    5 ★
    100% 
    3
    4 ★
    0% 
    0
    3 ★
    0% 
    0
    2 ★
    0% 
    0
    1 ★
    0% 
    0
    Write a Review Ask a Question

    Thank you for submitting a review!

    Your input is very much appreciated. Share it with your friends so they can enjoy it too!

    Filter Reviews:
      OD
      06/05/2023
      Orland D.
      United States United States

      Bicooler review

      I was amazed by the quality of the piping and how easy the install was and how thiccc the walls of the pipes were.

      Share   |   Facebook  •  Twitter
      Was this helpful?  0    0
      A ARM Motorsports Customer
      BA
      04/19/2023
      Brian A.
      United States United States

      About time

      Ever since installing my ARM FMIC, I didn't like the fact that the factory IC was sitting idle. I wanted to utilize the factory IC along with the ARM FMIC but couldn't come to grips with paying insane prices for pipes from another vendor. Let alone, buying another brand that wouldn't fit right or had to be modified. With these, I had no issue with installation to both intercoolers. On the driver side, I had to bend recirculating pumps harness arm up and out of the way to make space on my 2020 GTI with manual transmission. Overall, everything mated up perfectly with my ARM charge pipes, and intercoolers. Quality of the pipes look good as well as the included clamps. Reused two from original pipes to clamp on pipes to factory intercooler and they were still in great shape after being exposed to NY winters. Overall, I'm I'm happy with the quality and ease of installation. Now I can finally utilize the no longer idle factory intercooler.

      Share   |   Facebook  •  Twitter
      Was this helpful?  0    0
      EP
      03/24/2022
      Elvis P.
      United States United States

      Great with everything

      I love my car more than ever

      Share   |   Facebook  •  Twitter
      Was this helpful?  0    0

      You may also like

      Net Orders Checkout

      Item Price Qty Total
      Subtotal $0.00
      Shipping
      Total

      Shipping Address

      Shipping Methods